G4FRConst.hh

Go to the documentation of this file.

//
// ********************************************************************
// * License and Disclaimer                                           *
// *                                                                  *
// * The  Geant4 software  is  copyright of the Copyright Holders  of *
// * the Geant4 Collaboration.  It is provided  under  the terms  and *
// * conditions of the Geant4 Software License,  included in the file *
// * LICENSE and available at  http://cern.ch/geant4/license .  These *
// * include a list of copyright holders.                             *
// *                                                                  *
// * Neither the authors of this software system, nor their employing *
// * institutes,nor the agencies providing financial support for this *
// * work  make  any representation or  warranty, express or implied, *
// * regarding  this  software system or assume any liability for its *
// * use.  Please see the license in the file  LICENSE  and URL above *
// * for the full disclaimer and the limitation of liability.         *
// *                                                                  *
// * This  code  implementation is the result of  the  scientific and *
// * technical work of the GEANT4 collaboration.                      *
// * By using,  copying,  modifying or  distributing the software (or *
// * any work based  on the software)  you  agree  to acknowledge its *
// * use  in  resulting  scientific  publications,  and indicate your *
// * acceptance of all terms of the Geant4 Software license.          *
// ********************************************************************
//
//
//
// Satoshi TANAKA, Tue Jul  2 15:30:49 JST 1996
 
#ifndef G4_FR_COMMAND_LIST_HH
#define G4_FR_COMMAND_LIST_HH
 
//----- Header comment
const char FR_G4_PRIM_HEADER[] = "##G4.PRIM-FORMAT-2.4";
// const   char  FR_PHYSICAL_VOLUME_NAME  [] = "#/PhysicalVolumeName" ;
const char FR_PHYSICAL_VOLUME_NAME[] = "#/PVName";
 
//----- Execution control (beginning with !)
const char FR_GUI[]              = "!GraphicalUserInterface";
const char FR_DEVICE[]           = "!Device";
const char FR_SET_CAMERA[]       = "!SetCamera";
const char FR_OPEN_DEVICE[]      = "!OpenDevice";
const char FR_CLOSE_DEVICE[]     = "!CloseDevice";
const char FR_DRAW_ALL[]         = "!DrawAll";
const char FR_CLEAR_DATA[]       = "!ClearData";
const char FR_QUIT[]             = "!Quit";
const char FR_DISCONNECT_DAWND[] = "!DisconnectDawnd";
const char FR_TERMINATE_DAWND[]  = "!TerminateDawnd";
const char FR_SAVE[]             = "!Save";
const char FR_END_SAVE[]         = "!EndSave";
const char FR_WAIT[]             = "!Wait";
const char FR_PAUSE[]            = "!Pause";
 
//----- Drawing Style
const char FR_WIREFRAME[] = "/Wireframe";
const char FR_SURFACE[]   = "/Surface";
const char FR_LINES[]     = "/Lines";
 
//----- Begin and End of Modeling
const char FR_BEGIN_MODELING[] = "!BeginModeling";
const char FR_END_MODELING[]   = "!EndModeling";
 
//----- Bounding box
const char FR_BOUNDING_BOX[]      = "/BoundingBox";
const char FR_BOUNDING_BOX_UNIT[] = "/BoundingBox -0.5 -0.5 -0.5  0.5 0.5 0.5";
 
//----- Number of divising curved surface
const int FR_DEFALUT_NDIV_VALUE = 24;
 
const char FR_NDIV[]         = "/Ndiv";
const char FR_NDIV_DEFAULT[] = "/Ndiv  24";
const char FR_NDIV_3[]       = "/Ndiv   3";
const char FR_NDIV_4[]       = "/Ndiv   4";
const char FR_NDIV_8[]       = "/Ndiv   8";
const char FR_NDIV_16[]      = "/Ndiv  16";
const char FR_NDIV_24[]      = "/Ndiv  24";
const char FR_NDIV_48[]      = "/Ndiv  48";
const char FR_NDIV_96[]      = "/Ndiv  96";
 
//----- Camera information
const char FR_CAMERA_POSITION[]         = "/CameraPosition";
const char FR_CAMERA_POSITION_DEFAULT[] = "/CameraPosition  100000.0  0.0  0.0";
// see from far upward position
const char FR_TARGET_POINT[]   = "/TargetPoint";
const char FR_ZOOM_FACTOR[]    = "/ZoomFactor";
const char FR_SCALE[]          = "/Scale";
const char FR_FOCAL_DISTANCE[] = "/FocalDistance";
 
//----- Body coordinate information
const char FR_BASE_VECTOR[] = "/BaseVector";
// Give e1 and e2. Then e3 is calculated.
const char FR_BASE_VECTOR_DEFAULT[] = "/BaseVector 1.0 0.0 0.0  0.0 1.0 0.0";
const char FR_ORIGIN[]              = "/Origin";
const char FR_ORIGIN_DEFAULT[]      = "/Origin  0.0  0.0  0.0";
 
//----- Attribute information
const char FR_DIFFUSE_RGB[] = "/DiffuseRGB";
// old name of /ColorRGB
 
const char FR_COLOR_RGB[]         = "/ColorRGB";
const char FR_COLOR_RGB_DEFAULT[] = "/ColorRGB  1.0  1.0  1.0";
const char FR_COLOR_RGB_WHITE[]   = "/ColorRGB  1.0  1.0  1.0";
 
const char FR_COLOR_RGB_RED[]   = "/ColorRGB  1.0  0.0  0.0";
const char FR_COLOR_RGB_GREEN[] = "/ColorRGB  0.0  1.0  0.0";
const char FR_COLOR_RGB_BLUE[]  = "/ColorRGB  0.0  0.0  1.0";
 
const char FR_COLOR_RGB_CYAN[]    = "/ColorRGB  0.0  1.0  1.0";
const char FR_COLOR_RGB_MAGENTA[] = "/ColorRGB  1.0  0.0  1.0";
const char FR_COLOR_RGB_YELLOW[]  = "/ColorRGB  1.0  1.0  0.0";
 
const char FR_SPECULAR_RGB[]         = "/SpecularRGB";
const char FR_SPECULAR_RGB_DEFAULT[] = "/SpecularRGB  1.0  1.0  1.0";
const char FR_SPECULAR_RGB_WHITE[]   = "/SpecularRGB  1.0  1.0  1.0";
 
const char FR_PHONG_POWER[]         = "/PhongPower";
const char FR_PHONG_POWER_DEFAULT[] = "/PhongPower  3";
 
const char FR_TRANSPARENCY[]     = "/Transparency";
const char FR_TRANSPARENCY_ON[]  = "/Transparency  1 ";  // transparent
const char FR_TRANSPARENCY_OFF[] = "/Transparency  0 ";  // non-transparent
 
const char FR_FORCE_WIREFRAME[]     = "/ForceWireframe";
const char FR_FORCE_WIREFRAME_ON[]  = "/ForceWireframe  1";
const char FR_FORCE_WIREFRAME_OFF[] = "/ForceWireframe  0";
 
const char FR_VISIBILITY[]     = "/Visibility";
const char FR_VISIBILITY_ON[]  = "/Visibility  1";  // visible
const char FR_VISIBILITY_OFF[] = "/Visibility  0";  // invisible
 
//----- 3D Primitives
const char FR_POLYHEDRON[]     = "/Polyhedron";
const char FR_VERTEX[]         = "/Vertex";
const char FR_FACET[]          = "/Facet";
const char FR_END_POLYHEDRON[] = "/EndPolyhedron";
 
const char FR_BOX[]      = "/Box";
const char FR_BOX_UNIT[] = "/Box  0.5  0.5  0.5";  // dx, dy, dz
 
const char FR_COLUMN[]      = "/Column";
const char FR_COLUMN_UNIT[] = "/Column 0.5  0.5";  // R dz
 
const char FR_POLYLINE[]      = "/Polyline";
const char FR_PL_VERTEX[]     = "/PLVertex";
const char FR_PL_VERTEX_OLD[] = "PLVertex";
const char FR_END_POLYLINE[]  = "/EndPolyline";
 
const char FR_TRD[] = "/Trd";
// /Trd  dx1 dx2 dy1 dy2 dz    ;
const char FR_TRAP[] = "/Trap";
// /Trap dz theta phi h1 bl1 tl1 alpha1 h2 bl2 tl2 alpha2
const char FR_TUBS[] = "/Tubs";
// /Tubs rmin rmax dz sphi dphi
const char FR_CONS[] = "/Cons";
// /Cons rmin1 rmax1 rmin2 rmax2 dz sphi dphi
const char FR_SPHERE[] = "/Sphere";
// /Sphere  R
const char FR_SPHERE_SEG[] = "/SphereSeg";
// /SphereSeg  rmin rmax s_theta d_theta s_phi d_phi
const char FR_PARA[] = "/Parallelepiped";
// /Parallelepiped  dx dy dz tanAlpha tanTheta_cosPhi tanTheta_sinPhi
const char FR_PCON[] = "/PolyCone";
// /PolyCone  sphi  dphi  nz  z[nz]  rmin[nz]  rmax[nz]
const char FR_PGON[] = "/PolyGon";
// /PolyGon   sphi  dphi  ndiv  nz  z[nz]  rmin[nz]  rmax[nz]
const char FR_TORUS[] = "/Torus";
// /PolyGon   sphi  dphi  ndiv  nz  z[nz]  rmin[nz]  rmax[nz]
 
//----- Marks I (arg: x y z half_size_3d)
const char FR_FONT_NAME[] = "/FontName";
 
//----- Marks I (arg: x y z half_size_3d)
const char FR_MARK_CIRCLE_2D[] = "/MarkCircle2D";
const char FR_MARK_SQUARE_2D[] = "/MarkSquare2D";
const char FR_MARK_TEXT_2D[]   = "/MarkText2D";
// /MarkText2D  x y z  size_world x_offset_world y_offset_world string
 
//----- Marks II (arg: x y z half_size_2d)
const char FR_MARK_CIRCLE_2DS[] = "/MarkCircle2DS";
const char FR_MARK_SQUARE_2DS[] = "/MarkSquare2DS";
const char FR_MARK_TEXT_2DS[]   = "/MarkText2DS";
// /MarkText2DS  x y z  size_pt x_offset_pt y_offset_pt string
 
//----- Text
const char FR_TEXT_2DS[] = "/Text2DS";
 
//----- For DAWNCUT
const char FR_CLIPPING_PLANE[] = "/ClippingPlane";
// /ClippingPlaneMarkCross2D  a b c d
//   for plane   ax + by + cz + d = 0
 
#endif